Huge $11M Electrical Inventory

Huge $11M Electrical Inventory

September 24, 2019
Online Only – El Paso, TX
Overstock of Commercial & Utility Electrical Gear

View Complete Listing

Loading Events

« All Events

  • This event has passed.

Alto Manufacturing Co

October 17

Presses

  • Komatsu 150-Ton Gap Frame Press Model OBS-150S-VS-3, SN D0014 (1994), 49.5″ x 31.5″ Bed, 7.87″ Stroke, 17.72″ Shut Height, 27-55 Strokes/Minute with Jaybird Straightener Model J12-1218, SN 2906
  • Rockford 125-Ton Press Model 8F (#T-81), 20″ Shut Height, 10″ Stroke, 18-40 Stroke/Minute with Air Clutch
  • Bliss 70-Ton OBI Press (#70), 4″ Stroke, 14.5″ Shut Height, 18-40 Strokes/Minute;
  • Niagra 45 Ton OBI Press Model M-45, SN 51785 (C-Press #91), 28″ x 18″ Bed, 3.5 Stroke, 18″ x 14″ Slide, 110 Strokes/Minute, with WPC Wintress Clutch/Brake Control & Ax Feed AF-1
  • Perkins 32 Ton OBI Press Model 32-S, SN 35558 (C-Frame Press #53), 30″ x 15″ Bed, 1.5″ Stroke, 7.75′ Shut Height
  • Walsh 26-Ton Cut-Off Press Model 26 (#44), SN 11267, 2.5 Stroke, 9.5 Shut Height, 123-240 Strokes/Minute;
  • Diebel 40-Ton Press (#42), 24″ x 9″ Bed, 2.5 Stroke, 7.75″ Shut Height, 72-360 Strokes/Minute;
  • Chicago Dries & Krump 25-Ton x 72″ Press Brake Model 355 SP (#38), SN L6110
  • Marshall Town 22-Ton Press Model No. 3 (#32), 2″ Stroke, 7″ Shut Height, 140 Strokes/Minute,
  • Moore 17-Ton Knocker Press (#30), 22″ x 10″ Bed, 10″ Shut Height, 1.5 Stroke, 48 Strokes/Minute with Air Feed Table; Marshall 50-Ton Press (#52), 30″ x 18″ Bed Space, 9″ Shut Height, 6″ Stroke, 40 Strokes/Minute with Autotech Control Readout;
  • Kenco 10-Ton OBI Press Model 104-107-200 (#9), SN 60-160, 175 Strokes/Minute;
  • Deide 8-Ton Press Model 85 (#7), SN270-5-54, 1.5″ Stroke, 6″ Die Space, 175 Strokes/Minute;
  • Deide 8-Ton OBI Press (#61) Model 8T:FCO, SN 316-9, 8 Ton Capacity, 2 Stroke, 6″ Die Space, 1″ Adjustable Slide, 200 Strokes/Minute;
  • Deide 8-Ton Cut-Off Press Model 8FCD (33), SN 892, 1″ Stroke, 6″ Die Space, 190 Strokes/Minute;

Roll-Formers

  • Dahlstrom 16-Stand Roll Former Model 400-12 OB, SN 1064, 1.5″ Shaft Diameter, 10″ Roll Space, 13″ Horizontal Center, 30 HP Motor; Dahlstrom 20-Ton Cut-Off Press Model 29VP, SN P162, 20-Ton, 3″ Stroke
  • Dahlstrom 12-Strand Roll Former Model 360-12, SN 332, 1.5″ Shaft Diameter, 8″ Roll Space, 4″-5″ Roll Diameter, 7.5″ HP Motor, Adjustable Height; Dahlstrom Cut-Off Press, 2″ Stroke
  • Ardcor 12-Stand Roll Former Model1-F, S/N 1600-11, 1.5 Shaft Diameter, 10″ Roll Space, 25 HP Motor, Ardcor Cut-Off Press, 3″ Stroke, 5″-7″ Shut Height
  • Ardcor 12-Shaft Roll Former Model 1-F, S/N 1655, 1.5″ Shaft Diameter, 10″ Roll Space, 20 HP Motor, Adjustable Height; Ardcor Cut-Off Press, 3″ Stroke
  • Tishken 10-Stand Roll Former, 1.25″ Shaft Diameter, 8″ Horizontal Shaft Center, 4.5 Center to Bed, Adjustable Height;  T-10 Coil Reel
  • Dahlstrom 8-Shaft Roll Former Model 360-OB, SN 134, 1.5″ Shaft Diameter, 10″ Roll Space, 20 HP Motor, Adjustable Height; Ardcor Cut-Off Press, 3″ Stroke
  • Ardcor 8 Stand Roll Former, 1.25″ Shaft Diameter, 6″ Horizontal Shaft Center, 3″ Roll Space, Adjustable Height; Deide 8-Ton Cut-Off Press Model 83 (#8), SN 263-9-54, 1.5 Stroke, 6″ Die Space; Littell No. 10 Centering Wheel, 1,000 Lbs Capacity
  • Dahlstrom 8-Strand Roll Former (#D8), 1.25″ Diameter, 3″ Roll Space
  • Yoder 7-Shaft Roll Former, 1.5″ Shaft Diameter, 7″ Horizontal Shaft Center; Dahlstrom Cut-Off Press, 2″ Stroke

Coil Reels & Cut-Off Presses

  • Dahlstrom 12-Ton Cut-Off Press Model 12TP, SN P-551, 3″ Stroke, 6.5-8″ Shut Height
  • Accra-Flex 3,500 Lbs Powered Uncoiler
  • Accra-Flex 3,500 Lbs Powered Uncoilder (#2)
  • Littell 600 Lbs Dual Coil Feeder Reel
  • Littell Coil Reel Model 40-18 (#Y-20)

Toolroom Equipment

  • Chevalier Automatic Surface Grinder Model FSG-3A1020, SN M3784018, 10″ x 20″ Table with Magnetic Chuck
  • Boyer Schultz 6-12 Deluxe Surface Grinder with Magnetic Chuck
  • (4) Bridgeport Vertical Mills
  • South Bend 17″ Engine Lathe Model Turn-nado, SN 74GJ-2572 with Cross Feed & Tailstock
  • South Bend 6″ Model A Engine Lathe, SN 72574KR12 with Cross Feed & Tailstock
  • Wilson Rockwell Hardness Tester Model 3-JR, SN 3 JR-5037

General Equipment

  • Miller Portable Spot Welders Model LMSW-52T, on Carts
  • Stone Double Miter Notching Saw Model DM-10, SN C36E, 10″ Blade
  • Alfamachine Italy 71″ Frame Saw; Rigid Chop Saw Model CM14500, SN 0536 32101;
  • Avey Drill Press
  • Walker-Turner Drill Press
  • Meba Horizontal Bandsaw Model 320 HBS
  • Assorted Famco & Greenard Arbor Presses
  • Dynaric Strapper Model DF20 Strapper
  • Delta Drill Press, Buffalo Drill Press
  • Famco Manual Shear Model G18-36

Forklifts

  • CAT 5,000 Lbs LP Forklift Model G025, SN 4EM01271, 4,329 Hours Indicated
  • Komatsu 2,000 Lbs LP Forklift Model FG15ST-15, SN 260073A, 5,208 Hours Indicated

Air Compressor & Dryer

  • Atlas Copco 100-HP Air Compressor Model GAU509, SN ARR S78 10U
  • Atlas Copco Air Dryer FD95, SNCAQ421396 (2010)

AND MUCH MORE!

Details

Date:
October 17
Event Category:
Website:
https://www.pplgroupllc.com/auction/current/alto-manufacturing-co/

Organizer

PPL Auctions
Phone:
224-927-5320
Website:
http://www.pplauctions.com

Venue

Online Timed
Chicago, IL 60657 United States + Google Map